/* Assembler macros for PA-RISC. Copyright (C) 1999, 2001, 2002, 2003, 2007 Free Software Foundation, Inc. This file is part of the GNU C Library. Contributed by Ulrich Drepper, , August 1999. Linux/PA-RISC changes by Philipp Rumpf, , March 2000. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ #include #include #include #undef ASM_LINE_SEP #define ASM_LINE_SEP ! #undef SYS_ify #define SYS_ify(syscall_name) (__NR_##syscall_name) /* WARNING: TREG must be a callee saves register so that it doesn't have to be restored after a call to another function */ #ifdef PIC # define TREG %r3 # define SAVE_PIC(SREG) copy %r19, SREG ASM_LINE_SEP # define LOAD_PIC(LREG) copy LREG, %r19 ASM_LINE_SEP /* Inline assembly defines */ # define TREG_ASM "%r4" /* Cant clobber r3, it holds framemarker */ # define SAVE_ASM_PIC " copy %%r19, %" TREG_ASM "\n" # define LOAD_ASM_PIC " copy %" TREG_ASM ", %%r19\n" # define CLOB_TREG TREG_ASM , # define PIC_REG_DEF register unsigned long __r19 asm("r19"); # define PIC_REG_USE , "r" (__r19) #else # define TREG %r3 # define SAVE_PIC(SREG) nop ASM_LINE_SEP # define LOAD_PIC(LREG) nop ASM_LINE_SEP /* Inline assembly defines */ # define TREG_ASM # define SAVE_ASM_PIC "nop \n" # define LOAD_ASM_PIC "nop \n" # define CLOB_TREG # define PIC_REG_DEF # define PIC_REG_USE #endif #ifdef __ASSEMBLER__ /* Syntactic details of assembler. */ #define ALIGNARG(log2) log2 /* For Linux we can use the system call table in the header file /usr/include/asm/unistd.h of the kernel. But these symbols do not follow the SYS_* syntax so we have to redefine the `SYS_ify' macro here. */ #undef SYS_ify #define SYS_ify(syscall_name) __NR_##syscall_name /* ELF-like local names start with `.L'. */ #undef L #define L(name) .L##name /* Linux uses a negative return value to indicate syscall errors, unlike most Unices, which use the condition codes' carry flag. Since version 2.1 the return value of a system call might be negative even if the call succeeded. E.g., the `lseek' system call might return a large offset. Therefore we must not anymore test for < 0, but test for a real error by making sure the value in %eax is a real error number. Linus said he will make sure the no syscall returns a value in -1 .. -4095 as a valid result so we can safely test with -4095. */ /* We don't want the label for the error handle to be global when we define it here. */ /*#ifdef PIC # define SYSCALL_ERROR_LABEL 0f #else # define SYSCALL_ERROR_LABEL syscall_error #endif*/ /* Argument manipulation from the stack for preparing to make a syscall */ #define DOARGS_0 /* nothing */ #define DOARGS_1 /* nothing */ #define DOARGS_2 /* nothing */ #define DOARGS_3 /* nothing */ #define DOARGS_4 /* nothing */ #define DOARGS_5 ldw -52(%sp), %r22 ASM_LINE_SEP #define DOARGS_6 DOARGS_5 ldw -56(%sp), %r21 ASM_LINE_SEP #define UNDOARGS_0 /* nothing */ #define UNDOARGS_1 /* nothing */ #define UNDOARGS_2 /* nothing */ #define UNDOARGS_3 /* nothing */ #define UNDOARGS_4 /* nothing */ #define UNDOARGS_5 /* nothing */ #define UNDOARGS_6 /* nothing */ /* Define an entry point visible from C. There is currently a bug in gdb which prevents us from specifying incomplete stabs information. Fake some entries here which specify the current source file. */ #define ENTRY(name) \ .text ASM_LINE_SEP \ .align ALIGNARG(4) ASM_LINE_SEP \ .export C_SYMBOL_NAME(name) ASM_LINE_SEP \ .type C_SYMBOL_NAME(name),@function ASM_LINE_SEP \ C_LABEL(name) ASM_LINE_SEP \ .PROC ASM_LINE_SEP \ .CALLINFO FRAME=64,CALLS,SAVE_RP,ENTRY_GR=3 ASM_LINE_SEP \ .ENTRY ASM_LINE_SEP \ /* SAVE_RP says we do */ ASM_LINE_SEP \ stw %rp, -20(%sr0,%sp) ASM_LINE_SEP \ /*FIXME: Call mcount? (carefull with stack!) */ /* Some syscall wrappers do not call other functions, and hence are classified as leaf, so add NO_CALLS for gdb */ #define ENTRY_LEAF(name) \ .text ASM_LINE_SEP \ .align ALIGNARG(4) ASM_LINE_SEP \ .export C_SYMBOL_NAME(name) ASM_LINE_SEP \ .type C_SYMBOL_NAME(name),@function ASM_LINE_SEP \ C_LABEL(name) ASM_LINE_SEP \ .PROC ASM_LINE_SEP \ .CALLINFO FRAME=64,NO_CALLS,SAVE_RP,ENTRY_GR=3 ASM_LINE_SEP \ .ENTRY ASM_LINE_SEP \ /* SAVE_RP says we do */ ASM_LINE_SEP \ stw %rp, -20(%sr0,%sp) ASM_LINE_SEP \ /*FIXME: Call mcount? (carefull with stack!) */ #undef END #define END(name) \ .EXIT ASM_LINE_SEP \ .PROCEND ASM_LINE_SEP \ .size C_SYMBOL_NAME(name), .-C_SYMBOL_NAME(name) ASM_LINE_SEP /* If compiled for profiling, call `mcount' at the start of each function. No, don't bother. gcc will put the call in for us. */ #define CALL_MCOUNT /* Do nothing. */ /* syscall wrappers consist of #include PSEUDO(...) ret PSEUDO_END(...) which means ENTRY(name) DO_CALL(...) nop bv 0(2) nop */ #define PSEUDO(name, syscall_name, args) \ ENTRY (name) ASM_LINE_SEP \ /* If necc. load args from stack */ ASM_LINE_SEP \ DOARGS_##args ASM_LINE_SEP \ DO_CALL (syscall_name, args) ASM_LINE_SEP \ UNDOARGS_##args ASM_LINE_SEP \ nop ASM_LINE_SEP #define ret \ /* Return value set by ERRNO code */ ASM_LINE_SEP \ bv,n 0(2) ASM_LINE_SEP #undef PSEUDO_END #define PSEUDO_END(name) \ END (name) /* We don't set the errno on the return from the syscall */ #define PSEUDO_NOERRNO(name, syscall_name, args) \ ENTRY_LEAF (name) ASM_LINE_SEP \ DOARGS_##args ASM_LINE_SEP \ DO_CALL_NOERRNO (syscall_name, args) ASM_LINE_SEP \ UNDOARGS_##args ASM_LINE_SEP \ nop ASM_LINE_SEP #define ret_NOERRNO ret #undef PSEUDO_END_NOERRNO #define PSEUDO_END_NOERRNO(name) \ END (name) /* This has to return the error value */ #undef PSEUDO_ERRVAL #define PSEUDO_ERRVAL(name, syscall_name, args) \ ENTRY_LEAF (name) ASM_LINE_SEP \ DOARGS_##args ASM_LINE_SEP \ DO_CALL_ERRVAL (syscall_name, args) ASM_LINE_SEP \ UNDOARGS_##args ASM_LINE_SEP \ nop ASM_LINE_SEP #define ret_ERRVAL ret #undef PSEUDO_END_ERRVAL #define PSEUDO_END_ERRVAL(name) \ END(name) #undef JUMPTARGET #define JUMPTARGET(name) name #define SYSCALL_PIC_SETUP /* Nothing. */ /* FIXME: This comment is not true. * All the syscall assembly macros rely on finding the approriate SYSCALL_ERROR_LABEL or rather HANDLER. */ /* int * __errno_location(void) so you have to store your value into the return address! */ #define DEFAULT_SYSCALL_ERROR_HANDLER \ .import __errno_location,code ASM_LINE_SEP \ /* branch to errno handler */ ASM_LINE_SEP \ bl __errno_location,%rp ASM_LINE_SEP /* Here are the myriad of configuration options that the above can work for... what we've done is provide the framework for future changes if required to each section */ #ifdef PIC # if RTLD_PRIVATE_ERRNO # define SYSCALL_ERROR_HANDLER DEFAULT_SYSCALL_ERROR_HANDLER # else /* !RTLD_PRIVATE_ERRNO */ # if defined _LIBC_REENTRANT # define SYSCALL_ERROR_HANDLER DEFAULT_SYSCALL_ERROR_HANDLER # else /* !_LIBC_REENTRANT */ # define SYSCALL_ERROR_HANDLER DEFAULT_SYSCALL_ERROR_HANDLER # endif /* _LIBC_REENTRANT */ # endif /* RTLD_PRIVATE_ERRNO */ #else # ifndef _LIBC_REENTRANT # define SYSCALL_ERROR_HANDLER DEFAULT_SYSCALL_ERROR_HANDLER # else # define SYSCALL_ERROR_HANDLER DEFAULT_SYSCALL_ERROR_HANDLER # endif #endif /* Linux takes system call arguments in registers: syscall number gr20 arg 1 gr26 arg 2 gr25 arg 3 gr24 arg 4 gr23 arg 5 gr22 arg 6 gr21 The compiler calls us by the C convention: syscall number in the DO_CALL macro arg 1 gr26 arg 2 gr25 arg 3 gr24 arg 4 gr23 arg 5 -52(sp) arg 6 -56(sp) gr22 and gr21 are caller-saves, so we can just load the arguments there and generally be happy. */ /* the cmpb...no_error code below inside DO_CALL * is intended to mimic the if (__sys_res...) * code inside INLINE_SYSCALL */ #define NO_ERROR -0x1000 #undef DO_CALL #define DO_CALL(syscall_name, args) \ /* Create a frame */ ASM_LINE_SEP \ stwm TREG, 64(%sp) ASM_LINE_SEP \ stw %sp, -4(%sp) ASM_LINE_SEP \ stw %r19, -32(%sp) ASM_LINE_SEP \ /* Save r19 */ ASM_LINE_SEP \ SAVE_PIC(TREG) ASM_LINE_SEP \ /* Do syscall, delay loads # */ ASM_LINE_SEP \ ble 0x100(%sr2,%r0) ASM_LINE_SEP \ ldi SYS_ify (syscall_name), %r20 ASM_LINE_SEP \ ldi NO_ERROR,%r1 ASM_LINE_SEP \ cmpb,>>=,n %r1,%ret0,L(pre_end) ASM_LINE_SEP \ /* Restore r19 from TREG */ ASM_LINE_SEP \ LOAD_PIC(TREG) /* delay */ ASM_LINE_SEP \ SYSCALL_ERROR_HANDLER ASM_LINE_SEP \ /* Use TREG for temp storage */ ASM_LINE_SEP \ copy %ret0, TREG /* delay */ ASM_LINE_SEP \ /* OPTIMIZE: Don't reload r19 */ ASM_LINE_SEP \ /* do a -1*syscall_ret0 */ ASM_LINE_SEP \ sub %r0, TREG, TREG ASM_LINE_SEP \ /* Store into errno location */ ASM_LINE_SEP \ stw TREG, 0(%sr0,%ret0) ASM_LINE_SEP \ /* return -1 as error */ ASM_LINE_SEP \ ldo -1(%r0), %ret0 ASM_LINE_SEP \ L(pre_end): ASM_LINE_SEP \ /* Restore our frame, restoring TREG */ ASM_LINE_SEP \ ldwm -64(%sp), TREG ASM_LINE_SEP \ /* Restore return pointer */ ASM_LINE_SEP \ ldw -20(%sp),%rp ASM_LINE_SEP /* We do nothing with the return, except hand it back to someone else */ #undef DO_CALL_NOERRNO #define DO_CALL_NOERRNO(syscall_name, args) \ /* No need to store r19 */ ASM_LINE_SEP \ ble 0x100(%sr2,%r0) ASM_LINE_SEP \ ldi SYS_ify (syscall_name), %r20 ASM_LINE_SEP \ /* Caller will restore r19 */ ASM_LINE_SEP /* Here, we return the ERRVAL in assembly, note we don't call the error handler function, but we do 'negate' the return _IF_ it's an error. Not sure if this is the right semantic. */ #undef DO_CALL_ERRVAL #define DO_CALL_ERRVAL(syscall_name, args) \ /* No need to store r19 */ ASM_LINE_SEP \ ble 0x100(%sr2,%r0) ASM_LINE_SEP \ ldi SYS_ify (syscall_name), %r20 ASM_LINE_SEP \ /* Caller will restore r19 */ ASM_LINE_SEP \ ldi NO_ERROR,%r1 ASM_LINE_SEP \ cmpb,>>=,n %r1,%ret0,0f ASM_LINE_SEP \ sub %r0, %ret0, %ret0 ASM_LINE_SEP \ 0: ASM_LINE_SEP #else /* GCC has to be warned that a syscall may clobber all the ABI registers listed as "caller-saves", see page 8, Table 2 in section 2.2.6 of the PA-RISC RUN-TIME architecture document. However! r28 is the result and will conflict with the clobber list so it is left out. Also the input arguments registers r20 -> r26 will conflict with the list so they are treated specially. Although r19 is clobbered by the syscall we cannot say this because it would violate ABI, thus we say TREG is clobbered and use that register to save/restore r19 across the syscall. */ #define CALL_CLOB_REGS "%r1", "%r2", CLOB_TREG \ "%r20", "%r29", "%r31" #undef INLINE_SYSCALL #define INLINE_SYSCALL(name, nr, args...) \ ({ \ long __sys_res; \ { \ register unsigned long __res asm("r28"); \ PIC_REG_DEF \ LOAD_ARGS_##nr(args) \ /* FIXME: HACK save/load r19 around syscall */ \ asm volatile( \ SAVE_ASM_PIC \ " ble 0x100(%%sr2, %%r0)\n" \ " ldi %1, %%r20\n" \ LOAD_ASM_PIC \ : "=r" (__res) \ : "i" (SYS_ify(name)) PIC_REG_USE ASM_ARGS_##nr \ : "memory", CALL_CLOB_REGS CLOB_ARGS_##nr \ ); \ __sys_res = (long)__res; \ } \ if ( (unsigned long)__sys_res >= (unsigned long)-4095 ){ \ __set_errno(-__sys_res); \ __sys_res = -1; \ } \ __sys_res; \ }) /* INTERNAL_SYSCALL_DECL - Allows us to setup some function static value to use within the context of the syscall INTERNAL_SYSCALL_ERROR_P - Returns 0 if it wasn't an error, 1 otherwise You are allowed to use the syscall result (val) and the DECL error variable to determine what went wrong. INTERLAL_SYSCALL_ERRNO - Munges the val/err pair into the error number. In our case we just flip the sign. */ #undef INTERNAL_SYSCALL_DECL #define INTERNAL_SYSCALL_DECL(err) #undef INTERNAL_SYSCALL_ERROR_P #define INTERNAL_SYSCALL_ERROR_P(val, err) \ ((val < 0) && (val > -4095)) #undef INTERNAL_SYSCALL_ERRNO #define INTERNAL_SYSCALL_ERRNO(val, err) (-(val)) /* Similar to INLINE_SYSCALL but we don't set errno */ #undef INTERNAL_SYSCALL #define INTERNAL_SYSCALL(name, err, nr, args...) \ ({ \ long __sys_res; \ { \ register unsigned long __res asm("r28"); \ PIC_REG_DEF \ LOAD_ARGS_##nr(args) \ /* FIXME: HACK save/load r19 around syscall */ \ asm volatile( \ SAVE_ASM_PIC \ " ble 0x100(%%sr2, %%r0)\n" \ " ldi %1, %%r20\n" \ LOAD_ASM_PIC \ : "=r" (__res) \ : "i" (SYS_ify(name)) PIC_REG_USE ASM_ARGS_##nr \ : "memory", CALL_CLOB_REGS CLOB_ARGS_##nr \ ); \ __sys_res = (long)__res; \ } \ __sys_res; \ }) /* The _NCS variant allows non-constant syscall numbers. */ #undef INTERNAL_SYSCALL_NCS #define INTERNAL_SYSCALL_NCS(name, err, nr, args...) \ ({ \ long __sys_res; \ { \ register unsigned long __res asm("r28"); \ PIC_REG_DEF \ LOAD_ARGS_##nr(args) \ /* FIXME: HACK save/load r19 around syscall */ \ asm volatile( \ SAVE_ASM_PIC \ " ble 0x100(%%sr2, %%r0)\n" \ " copy %1, %%r20\n" \ LOAD_ASM_PIC \ : "=r" (__res) \ : "r" (name) PIC_REG_USE ASM_ARGS_##nr \ : "memory", CALL_CLOB_REGS CLOB_ARGS_##nr \ ); \ __sys_res = (long)__res; \ } \ __sys_res; \ }) #define LOAD_ARGS_0() #define LOAD_ARGS_1(r26) \ register unsigned long __r26 __asm__("r26") = (unsigned long)(r26); \ LOAD_ARGS_0() #define LOAD_ARGS_2(r26,r25) \ register unsigned long __r25 __asm__("r25") = (unsigned long)(r25); \ LOAD_ARGS_1(r26) #define LOAD_ARGS_3(r26,r25,r24) \ register unsigned long __r24 __asm__("r24") = (unsigned long)(r24); \ LOAD_ARGS_2(r26,r25) #define LOAD_ARGS_4(r26,r25,r24,r23) \ register unsigned long __r23 __asm__("r23") = (unsigned long)(r23); \ LOAD_ARGS_3(r26,r25,r24) #define LOAD_ARGS_5(r26,r25,r24,r23,r22) \ register unsigned long __r22 __asm__("r22") = (unsigned long)(r22); \ LOAD_ARGS_4(r26,r25,r24,r23) #define LOAD_ARGS_6(r26,r25,r24,r23,r22,r21) \ register unsigned long __r21 __asm__("r21") = (unsigned long)(r21); \ LOAD_ARGS_5(r26,r25,r24,r23,r22) /* Even with zero args we use r20 for the syscall number */ #define ASM_ARGS_0 #define ASM_ARGS_1 ASM_ARGS_0, "r" (__r26) #define ASM_ARGS_2 ASM_ARGS_1, "r" (__r25) #define ASM_ARGS_3 ASM_ARGS_2, "r" (__r24) #define ASM_ARGS_4 ASM_ARGS_3, "r" (__r23) #define ASM_ARGS_5 ASM_ARGS_4, "r" (__r22) #define ASM_ARGS_6 ASM_ARGS_5, "r" (__r21) /* The registers not listed as inputs but clobbered */ #define CLOB_ARGS_6 #define CLOB_ARGS_5 CLOB_ARGS_6, "%r21" #define CLOB_ARGS_4 CLOB_ARGS_5, "%r22" #define CLOB_ARGS_3 CLOB_ARGS_4, "%r23" #define CLOB_ARGS_2 CLOB_ARGS_3, "%r24" #define CLOB_ARGS_1 CLOB_ARGS_2, "%r25" #define CLOB_ARGS_0 CLOB_ARGS_1, "%r26" #endif /* __ASSEMBLER__ */ /* Pointer mangling is not yet supported for HPPA. */ #define PTR_MANGLE(var) (void) (var) #define PTR_DEMANGLE(var) (void) (var)