Index: linux-2.6.17.14-fic3/drivers/net/Kconfig
===================================================================
--- linux-2.6.17.14-fic3.orig/drivers/net/Kconfig	2006-12-07 16:16:46.000000000 +0100
+++ linux-2.6.17.14-fic3/drivers/net/Kconfig	2006-12-07 16:17:50.000000000 +0100
@@ -1246,7 +1246,7 @@
 
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
-	depends on NET_ETHERNET && (ISA || EISA || PCI)
+	depends on NET_ETHERNET && (ISA || EISA || PCI || MACH_QT2410)
 	help
 	  This is another class of network cards which attach directly to the
 	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
@@ -1386,7 +1386,7 @@
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
+	depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_QT2410)
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
Index: linux-2.6.17.14-fic3/drivers/net/cs89x0.c
===================================================================
--- linux-2.6.17.14-fic3.orig/drivers/net/cs89x0.c	2006-12-07 16:16:46.000000000 +0100
+++ linux-2.6.17.14-fic3/drivers/net/cs89x0.c	2006-12-07 16:17:50.000000000 +0100
@@ -195,6 +195,10 @@
 #define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
 static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
+#elif defined(CONFIG_MACH_QT2410)
+#include <asm/arch/irqs.h>
+static unsigned int netcard_portlist [] __initdata = { 0xe0000300, 0 };
+static unsigned int cs8900_irq_map[] = { IRQ_EINT9, 0, 0, 0 };
 #else
 static unsigned int netcard_portlist[] __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -830,6 +834,14 @@
 
 	printk(" IRQ %d", dev->irq);
 
+	dev->dev_addr[0] = 0x00;
+	dev->dev_addr[1] = 0x00;
+	dev->dev_addr[2] = 0xc0;
+	dev->dev_addr[3] = 0xff;
+	dev->dev_addr[4] = 0xee;
+	dev->dev_addr[5] = 0x08;
+	set_mac_address(dev, dev->dev_addr);
+
 #if ALLOW_DMA
 	if (lp->use_dma) {
 		get_dma_channel(dev);
@@ -1310,7 +1322,7 @@
 	else
 #endif
 	{
-#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
+#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) && !defined(CONFIG_MACH_QT2410)
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);